manualshive.com logo in svg

Extreme Networks ExtremeSwitching SLX 9540, Руководство по установке оборудования

Сетевой коммутатор Extreme Networks ExtremeSwitching SLX 9540 - мощное устройство для оптимальной работы вашей сети. На нашем сайте вы можете бесплатно скачать руководство по аппаратной установке и использованию этого устройства. Посетите {сайт} для загрузки.

Поделиться
Скачать
background image

Power Supplies

•

Power supply overview....................................................................................................................................................................................77

•

Precautions specific to power supplies.................................................................................................................................................... 79

•

Identifying the airflow direction.................................................................................................................................................................... 80

•

Time and items required.................................................................................................................................................................................80

•

Replacing a power supply.............................................................................................................................................................................. 80

•

Inserting a new AC power supply .............................................................................................................................................................. 81

•

Inserting a new DC power supply...............................................................................................................................................................82

•

Grounding the SLX 9540 device............................................................................................................................................................... 83

Power supply overview

The ExtremeSwitching SLX 9540 device supports alternating-current (AC) and direct-current (DC) power supplies. The switch is capable
of running on one power supply and four fan assemblies. The second power supply and fifth fan assembly provide redundancy.

If the second power supply and any fan slots are unused, you must cover them with filler panels.

NOTE

Extreme Networks recommends that the SLX 9540 device operate with two power supplies and five fan assemblies installed. If
a power supply or fan assembly fails, it must be replaced as soon as possible.

NOTE

AC and DC power supplies can be installed and used in the same device.

The power supplies in the SLX 9540 device chassis can be removed and replaced without special tools. The device can continue
operating during the replacement.

The device supports the following types of power supplies:

•

AC power supply with nonport-side air exhaust. This unit moves the air from the port-side to the nonport-side of the device.

•

AC power supply with nonport-side air intake. This unit moves the air from the nonport-side to the port-side of the device.

•

DC power supply with nonport-side air exhaust. This unit moves the air from the port-side to the nonport-side of the device.

•

DC power supply with nonport-side air intake. This unit moves the air from the nonport-side to the port-side of the device.

ExtremeSwitching SLX 9540 Hardware Installation Guide

9036360-00 Rev AB

77

Содержание ExtremeSwitching SLX 9540













































































































Отзывы:

Нет отзывов

Похожие инструкции для ExtremeSwitching SLX 9540

SMART-AVI RDU-8P Quick Start Manual preview
RDU-8P
Бренд: SMART-AVI Страницы: 2
Cabletron Systems DLEHF-MA User Manual preview
DLEHF-MA
Бренд: Cabletron Systems Страницы: 194
TP-Link Tapo S210 User Manual preview
Tapo S210
Бренд: TP-Link Страницы: 28
Campbell Hausfeld CW301300AJ Additional Operating Instructions preview
CW301300AJ
Бренд: Campbell Hausfeld Страницы: 4
A-Neuvideo ANI-MINI601HD Instruction Manual preview
ANI-MINI601HD
Бренд: A-Neuvideo Страницы: 15
HDTV Supply HDTVMT0808140 User Manual preview
HDTVMT0808140
Бренд: HDTV Supply Страницы: 21
WAGO 852-1111 Mounting, Installation And Handling preview
852-1111
Бренд: WAGO Страницы: 36
Black Box SW614A User Manual preview
SW614A
Бренд: Black Box Страницы: 57
ZIMCO RS74A-750F Installation & Operation Manual preview
RS74A-750F
Бренд: ZIMCO Страницы: 7
Goobay 95730 Quick Start Manual preview
95730
Бренд: Goobay Страницы: 2
Kramer VP-443 User Manual preview
VP-443
Бренд: Kramer Страницы: 29
Niles ABS-1 Features & Specifications Manual preview
ABS-1
Бренд: Niles Страницы: 2
H3C S1850 Series Getting Started Manual preview
S1850 Series
Бренд: H3C Страницы: 19
Lindy 32937 Manual preview
32937
Бренд: Lindy Страницы: 8
Korenix JetNet 5428G-20SFP Series Quick Installation Manual preview
JetNet 5428G-20SFP Series
Бренд: Korenix Страницы: 2
rackit MRS-815 Installer/User Manual preview
MRS-815
Бренд: rackit Страницы: 24
MaxLink PSAT-6-4P-250 Quick Installation Manual preview
PSAT-6-4P-250
Бренд: MaxLink Страницы: 2
Panasonic ABV BV Product Catalog preview
ABV BV
Бренд: Panasonic Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды