•
#2 Phillips screwdriver to attach bracket screws that are provided with the switch. We recommend
using a magnetic screwdriver.
•
ESD-preventive wrist strap for installing optional ports at the back of the switch.
Attaching the Switch to a Two-Post Rack
You can attach your switch to a two-post rack in either of two configurations:
•
Front mount
•
Mid-mount
The side of the switch has different sets of holes for attaching mounting brackets in either configuration.
Brackets for a two-post mount are not included in the box with your switch. However, they can be
ordered separately using part number XN-2P-RMKIT-XA.
To attach your switch to a two-post rack, follow these steps:
1 Remove all contents of the rack-mount kit.
Figure 7: Rack-Mount Kit Components
Installing Your Switch
ExtremeAccess Series: Hardware Installation Guide
28
