Table 16: RJ45 Port LED state indicators
Label
Color and Status
Description
Speed/PoE+
Green, Blink
The port is set to operate at 1000 Mbps with PoE.
Green, Steady
The port is set to operate at 1000 Mbps without PoE+.
Amber, Blink
The port is set to operate at 100 Mbps with PoE+.
Amber, Steady
The port is set to operate at 100 Mbps without PoE+.
Amber, Green Pulse
The port is experiencing a PoE+ error.
Off
When the Link/Activity LED is green and the Speed LED is off,
the port is set to operate at 10 Mbps for all models.
Link / Activity
Green, Steady
The link established but no data activity exists.
Green, Blink
The link is established and data activity exists (the blink rate
indicates the level of activity).
Green, Slow Blink
The port is administratively disabled.
Off
Local/remote fault.
Table 17: SFP/SFP+ transceiver Port LED state indicators
Label
Color and Status
Description
In Use
Green, Blink
Not applicable.
Green, Steady
The SFP/SFP+ port and the transmit port are active.
Amber, Blink
Not applicable.
Amber, Steady
SFP/SFP+ Installed—TX Port Inactive
Off
No SFP/SFP+ transceiver is present.
Link / Activity
Green, Blink
Activity exists on the port.
Green, Slow Blink
Software disabled this port.
Green, Steady
The link is operating normally.
Off
No link exists.
Note:
• If you connect two ports explicitly set for different speeds (for example one configured as
10BASE-T and the other as 100BASE-TX) the port link LED may indicate a link, but the
switch does not establish a link. Connect ports using the same set speed or use auto-
negotiation on each switch.
• The port Link/Activity LEDs graphically represented in EDM are always steady once a link
is established. They do not blink to reflect port traffic activity.
LED state definitions
August 2018
Installing the Virtual Services Platform 4450GTX-HT-PWR+
35
