background image

including any code and software unless expressly authorized by

Extreme Networks. Unauthorized reproduction, transmission,

dissemination, storage, and or use without the express written

consent of Extreme Networks can be a criminal, as well as a civil

offense under the applicable law.

Virtualization

The following applies if the product is deployed on a virtual machine.

Each product has its own ordering code and license types. Note,

unless otherwise stated, that each Instance of a product must be

separately licensed and ordered. For example, if the end user

customer or Extreme Networks Channel Partner would like to install

two Instances of the same type of products, then two products of that

type must be ordered.

Third Party Components

“Third Party Components” mean certain software programs or

portions thereof included in the Software or Hosted Service may

contain software (including open source software) distributed under

third party agreements (“Third Party Components”), which contain

terms regarding the rights to use certain portions of the Software

(“Third Party Terms”). As required, information regarding distributed

Linux OS source code (for those products that have distributed Linux

OS source code) and identifying the copyright holders of the Third

Party Components and the Third Party Terms that apply is available

in the products, Documentation or on Extreme Networks’ website

at:

http://www.extremenetworks.com/support/policies/software-

licensing 

or such successor site as designated by Extreme Networks.

The open source software license terms provided as Third Party

Terms are consistent with the license rights granted in these Software

License Terms, and may contain additional rights benefiting You,

such as modification and distribution of the open source software.

The Third Party Terms shall take precedence over these Software

License Terms, solely with respect to the applicable Third Party

Components to the extent that these Software License Terms impose

greater restrictions on You than the applicable Third Party Terms.

The following applies only if the H.264 (AVC) codec is distributed with

the product. THIS PRODUCT IS LICENSED UNDER THE AVC

PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A

CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE

REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH

THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC

VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A

PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO

PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS

GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.

ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,

L.L.C. SEE 

HTTP://WWW.MPEGLA.COM

.

Service Provider

THE FOLLOWING APPLIES TO EXTREME NETWORKS CHANNEL

PARTNER’S HOSTING OF EXTREME NETWORKS PRODUCTS

OR SERVICES. THE PRODUCT OR HOSTED SERVICE MAY USE

THIRD PARTY COMPONENTS SUBJECT TO THIRD PARTY

TERMS AND REQUIRE A SERVICE PROVIDER TO BE

INDEPENDENTLY LICENSED DIRECTLY FROM THE THIRD

PARTY SUPPLIER. AN EXTREME NETWORKS CHANNEL

PARTNER’S HOSTING OF EXTREME NETWORKS PRODUCTS

MUST BE AUTHORIZED IN WRITING BY EXTREME NETWORKS

AND IF THOSE HOSTED PRODUCTS USE OR EMBED CERTAIN

THIRD PARTY SOFTWARE, INCLUDING BUT NOT LIMITED TO

MICROSOFT SOFTWARE OR CODECS, THE EXTREME

NETWORKS CHANNEL PARTNER IS REQUIRED TO

INDEPENDENTLY OBTAIN ANY APPLICABLE LICENSE

AGREEMENTS, AT THE EXTREME NETWORKS CHANNEL

PARTNER’S EXPENSE, DIRECTLY FROM THE APPLICABLE

THIRD PARTY SUPPLIER.

WITH RESPECT TO CODECS, IF THE EXTREME NETWORKS

CHANNEL PARTNER IS HOSTING ANY PRODUCTS THAT USE

OR EMBED THE G.729 CODEC, H.264 CODEC, OR H.265

CODEC, THE EXTREME NETWORKS CHANNEL PARTNER

ACKNOWLEDGES AND AGREES THE EXTREME NETWORKS

CHANNEL PARTNER IS RESPONSIBLE FOR ANY AND ALL

RELATED FEES AND/OR ROYALTIES. THE G.729 CODEC IS

LICENSED BY SIPRO LAB TELECOM INC. SEE 

WWW.SIPRO.COM/CONTACT.HTML

. THE H.264 (AVC) CODEC IS

LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR

THE PERSONAL USE OF A CONSUMER OR OTHER USES IN

WHICH IT DOES NOT RECEIVE REMUNERATION TO: (I) ENCODE

VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED

BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR

WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO

PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION

FOR H.264 (AVC) AND H.265 (HEVC) CODECS MAY BE

OBTAINED FROM MPEG LA, L.L.C. SEE 

HTTP://

WWW.MPEGLA.COM

.

Compliance with Laws

You acknowledge and agree that it is Your responsibility for

complying with any applicable laws and regulations, including, but not

limited to laws and regulations related to call recording, data privacy,

intellectual property, trade secret, fraud, and music performance

rights, in the country or territory where the Extreme Networks product

is used.

Preventing Toll Fraud

“Toll Fraud” is the unauthorized use of your telecommunications

system by an unauthorized party (for example, a person who is not a

corporate employee, agent, subcontractor, or is not working on your

company's behalf). Be aware that there can be a risk of Toll Fraud

associated with your system and that, if Toll Fraud occurs, it can

result in substantial additional charges for your telecommunications

services.

Security Vulnerabilities

Information about Extreme Networks’ security support policies can be

found in the Global Technical Assistance Center Knowledgebase at 

https://gtacknowledge.extremenetworks.com/

.

Downloading Documentation

For the most current versions of Documentation, see the Extreme

Networks Support website: 

http://

documentation.extremenetworks.com

, or such successor site as

designated by Extreme Networks.

Contact Extreme Networks Support

See the Extreme Networks Support website:

http://

www.extremenetworks.com/support

 for product or Hosted Service

notices and articles, or to report a problem with your Extreme

Networks product or Hosted Service. For a list of support telephone

numbers and contact addresses, go to the Extreme Networks

Support website:

http://www.extremenetworks.com/support/contact/

(or such successor site as designated by Extreme Networks), scroll

to the bottom of the page, and select Contact Extreme Networks

Support.

Trademarks

The trademarks, logos and service marks (“Marks”) displayed in this

site, the Documentation, Hosted Service(s), and product(s) provided

by Extreme Networks are the registered or unregistered Marks of

Extreme Networks, Inc., its affiliates, its licensors, its suppliers, or

other third parties. Users are not permitted to use such Marks without

prior written consent from Extreme Networks or such third party

which may own the Mark. Nothing contained in this site, the

Documentation, Hosted Service(s) and product(s) should be

construed as granting, by implication, estoppel, or otherwise, any

license or right in and to the Marks without the express written

permission of Extreme Networks or the applicable third party.

Extreme Networks is a registered trademark of Extreme Networks,

Inc.

All non-Extreme Networks trademarks are the property of their

respective owners. Linux

®

 is the registered trademark of Linus

Torvalds in the U.S. and other countries.

For additional information on Extreme Networks trademarks, please

see: 

http://www.extremenetworks.com/company/legal/

Содержание EC4400004-E6














































Отзывы: