Extreme Networks Campus Controller E2122, Руководство по установке

Страница: 10 / 27

Controller Installation Guidelines
Verify the Box Contents on page 10
Mount the Controller on page 11
Details about the steps involved to safely install and configure the controller.
About This Task
Follow the steps to verify the controller box contents and safely install it.
Procedure
1. Verify the box contents .
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact
Extreme Networks Support .
3. Mount the controller on a rack or a table.
4. Connect the controller to a power source .
5. Install a power supply .
For power supply troubleshooting details, see remove a power supply or replace a power supply .
6. Configure the controller via console port or management port .
7. Connect the data ports .
8. Install a transceiver .
What to Do Next
Read and review the regulatory and compliance information .
Verify the Box Contents
When you receive the controller, ensure that the box contents are as follows:
•
One E2122 Quick Reference
•
One Extreme Campus Controller E2122 unit
•
Two shipping lock screws
•
One AC power cord bracket and retention strap kit
•
One rack mounting kit
10 Extreme Campus Controller™