manualshive.com logo in svg

Extreme Networks AP460, Руководство по установке, Страница: 48 / 59

Поделиться
Скачать
Extreme Networks AP460 Скачать руководство пользователя страница 48

Regulatory and Compliance Information

Professional Installation Instruction

 on page 48

Safety Guidelines

 on page 49

Federal Communications Commission (FCC) Notice

 on page 50

Industry Canada Notice

 on page 50

Detachable Antenna Usage

 on page 51

Australia Notice

 on page 52

Brazil Agência Nacional De Telecomunicações (Anatel) Statement

 on page 52

Hazardous Substances

 on page 53

Supplement to Product Instructions

 on page 53

NCC Statement

 on page 53

CE Information

 on page 54

European Waste Electrical and Electronic Equipment (WEEE) Notice

on page 54

Declaration of Conformity in Languages of the European Community

on page 55

Learn about safety guidelines, compliance notices, and regulatory information pertaining to various
countries in which the device can be used.

Professional Installation Instruction

Qualified personnel

This product is designed for specific application and must to be installed by a qualified personnel who
has RF and related rule knowledge. The general user must not attempt to install or change the setting.
Qualified persons are defined as persons who are authorized to commission protective grounding, label
devices, systems, and circuits in accordance with established safety practices and standards. A qualified
person understands the requirements and risks involved with installing outdoor electrical equipment in
accordance with national codes.

External antenna

Use only the antennas which have been approved by the applicant. The non-approved antennas can
produce unwanted spurious or excessive RF transmitting power which can lead to the violation of
FCC/IC limit and is prohibited.

48

ExtremeWireless™ AP460i/e Access Points

Содержание AP460




























































Отзывы:

Нет отзывов