manualshive.com logo in svg

Extreme Networks AP460, Руководство по установке, Страница: 55 / 59

Поделиться
Скачать
Extreme Networks AP460 Скачать руководство пользователя страница 55

In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic
equipment (WEEE):

1. The symbol above indicates that separate collection of electrical and electronic equipment is

required.

2. When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted

municipal waste. It must be collected and treated separately.

3. It has been determined by the European Parliament that there are potential negative effects on the

environment and human health as a result of the presence of hazardous substances in electrical and
electronic equipment.

4. It is the user's responsibility to utilize the available collection system to ensure WEEE is properly

treated.

For information about the available collection system, please contact Extreme Environmental
Compliance at [email protected].

Declaration of Conformity in Languages of the European Community

English

Hereby, Extreme Networks declares that the radio

equipment type (AP460i/e) is in compliance with

Directive 2014/53/EU. For full text of the EU

Declaration of Conformity, contact Extreme

Regulatory Compliance at

[email protected]

Finnish

Valmistaja Extreme Networks vakuuttaa täten että

Radio LAN device (AP460i/e) tyyppinen laite on

direktiivin 2014/53/EU oleellisten vaatimusten ja

sitä koskevien direktiivin muiden ehtojen

mukainen. EU-vaatimustenmukaisuusvaatimuksen

täydellisestä tekstistä ota yhteyttä äärimmäisiin

säädösten noudattamiseen osoitteessa

[email protected]

Dutch

Hierbij verklaart Extreme Networks dat het toestel

Radio LAN device (AP460i/e) in

overeenstemming is met de essentiële eisen en de

andere relevante bepalingen van richtlijn

2014/53/EU. Neem voor de volledige tekst van de

EU-conformiteitsverklaring u contact opnemen

met extreme regelgeving op

[email protected]

French

Par la présente Extreme Networks déclare que

l'appareil Radio LAN device (AP460i/e) est

conforme aux exigences essentielles et aux autres

dispositions pertinentes de la directive

2014/53/EU. Pour obtenir le texte intégral du

processus de Déclaration de la conformité de l'UE,

veuillez contacter la conformité réglementaire

extrême à l'adresse suivante:

[email protected]

Regulatory and Compliance Information

Declaration of Conformity in Languages of the

European Community

ExtremeWireless™ AP460i/e Access Points

55

Содержание AP460




























































Отзывы:

Нет отзывов