Hardware Installation
AP-8432 Installation Guide
15
The LEDs display error conditions, and transmission, and network activity for the 5 GHz
802.11ac (amber) radio and the 2.4 GHz 802.11n (green) radio, sensor radio (white) and the
BLE radio (blue).
State
5 GHz Activity
LED (Amber)
2.4 GHz
Activity LED
(Green)
LED
(Blue)
LED
(White)
Firmware
Update
On
Off
Off
Off
Normal
Operation
•
If the radio
for this is
disabled:
turned off.
•
If there is
activity on
this band:
Blink interval
at 2 times
per second
•
If the radio
for this is
disabled:
turned off.
•
If there is
activity on
this band:
Blink interval
at 2 times per
second
N/A
N/A
Not configured
On
On
N/A
N/A
Locate AP
Mode
LEDs blink in
an alternating
green, amber,
blue and white
pattern using
an irregular
blink rate. This
LED state in no
way resembles
normal
operating
conditions
LEDs blink in an
alternating
green, amber,
blue and white
pattern using an
irregular blink
rate. This LED
state in no way
resembles
normal operating
conditions.
LEDs blink in an
alternating green,
amber, blue and
white pattern
using an irregular
blink rate. This
LED state in no
way resembles
normal operating
conditions.
LEDs blink in
an alternating
green, amber,
blue and white
pattern using
an irregular
blink rate. This
LED state in no
way resembles
normal
operating
conditions
Sensor without
SS connected
N/A
N/A
N/A
Off
Sensor with
SS connected
N/A
N/A
N/A
On
Air Termination
state
N/A
N/A
N/A
Blinking 0.5
second in 1
second duty
cycle
BT radio
disabled
N/A
N/A
Off
N/A
BT radio
enabled
(operational)
N/A
N/A
On
N/A