Extreme Networks Altitude 3510, Руководство по установке

Страница: 14 / 46

Hardware Installation
Altitude 3510 Access Point Installation Guide
14
CAUTION
The AP3510 supports any standards-based 802.3af compliant power source. However, using the
wrong solution could severely damage the AP3510 and void the product warranty.
Mounting the AP3510
The AP3510 can rest on a flat surface, attach to a wall, mount under a suspended T-Bar
or above a ceiling (plenum or attic). Choose one of the following mounting options
based on the physical environment of the coverage area. Do not mount the AP3510 in a
location that has not been approved in a site survey.
Desk Mounting
The desk mount option uses rubber feet (found in the accessories bag shipped with the
AP3510) allowing the unit to sit on most flat surfaces.
To install the AP3510 in a desk mount orientation:
1 Turn the AP3510 upside down.
2
Remove the backings from the four (4) rubber feet and attach them to the four
rubber feet recess areas on the AP3510.
3 Attach the Radio 1 and Radio 2 antennas to their correct connectors. The antenna
covers will most likely need to be removed to orient the antenna upward in a typical
desktop installation.