Extreme Max 3006.4550, Инструкции по установке и использованию

Страница: 1 / 12

Customer Service: 651-357-1874 | boatliftboss@extrememax.com | www.extrememax.com
3006.4550 - 12 Volt
3006.4553 - 120 Volt
Boat Lift Buddy™
Installation & Use Instructions
If there are any missing or damaged parts,
DO NOT return Boat Lift Buddy™ to the retailer.
Call the Boat Lift Buddy™ Service Dept. at: 651-357-1862
E-mail - service@extrememax.com
2540ex0116
Tools Required:
• 3/8” Socket or Wrench
• 7/16” Socket or Wrench
• 9/16” Socket or Wrench
• 15/16” Socket or Wrench
• Adjustable Wrench
• Flat Screw Driver
• 3/16” Drill Bit (Optional)
Components List:
(1) Torque Arm
(1) Off-Set Bracket
(1) Mounting Bracket
(4) 1/4” Bolts
(4) Self Tapping Screws
(2) Spacer Bars
(1) Bungee Cord
(2) Hose Clamps
(1) 15’ Battery Cable
(1) Motor Assembly
(1) 5/8” x 1-1/2” Bolt
(1) 5/8” Locking Nut
(4) 3/8” Bolts
Warning for 12-Volt Models:
In case of emergency, pull apart the red quick connectors to shutdown the system.
*View an installation demonstration on the Extreme Max Products
YouTube channel at: www.youtube.com/extrememaxproducts
Warning for 120-Volt Models:
All 120 Volt Boat Lift Buddy
™
units must only be used on an electrical circuit which has ground fault interrupter protection. The
interrupter and its supply circuit MUST be installed to local and state electrical codes. The supply circuit needs to be properly
sized for the correct length of run and requirements. In low voltage situations a buck boost transformer can be used to increase
voltage.
Contact a licensed electrical contractor for correct installation. Failure to wire properly and or install ground fault
interrupter puts user at high risk of injury or death.
Unplug Boat Lift Buddy ™ when not in use or before storms to help prevent electrical damage from lightning or power surges.