Extreme Flight slick 580 exp, Руководство по сборке

Страница: 12 / 14

Use two6” (150mm) servo extensions for the ai-
leron leads inside the fuselage. Your Slick includes
these mounting locations for the female servo con-
nectors.
Install an Extreme Flight RC fuel dot as shown into
the fuselage side.
This is a typical overflow vent outlet location on the
bottom of the fuselage.
Measure the location of the exhaust outlets from
the firewall. Transfer this dimension to the bottom
of the cowl and cut the required openings. We use a
Dremel tool for this job - protect your eyes and lungs
from dust.
Working slowly, checking fit often, enlarge the open-
ings until the cowl slides smoothly on and every-
thing has clearance. Note that we have shown the
minimum amount of opening, which is fine for cool
weather. During the hot Summer, your engine may
need more cooling air
13
Mount your receiver, and tie all wires to prevent
vibration damage.
For electric power, use strong velcro straps to re-
strain the lipo battery packs as shown.
For electric power, open the vents on the bottom of
the fuselage as shown.