Extreme Flight A173V2-O Скачать руководство пользователя

Страница: 4 / 18

www.modellmarkt24.ch

Items needed for completion

-masking tape

-Thin and medium CA. We highly recommend Mercury M5T thin and M100XF medium

formulas as well as the Mercury glue tips.

-Blue Loctite.

-Electric drill with an assortment of small drill bits.

-Small flat head and Phillips head screw drivers.

-Standard and needle nose pliers.

-Metric balldriver or allen key set.

-4 sub micro metal geared servos. All flight testing was performed with Hitec HS-70MG

-Torque 2814T/820 Brushless Outrunner motor.

-Airboss Elite 45 Amp ESC.

-4S 2100-2700 mah LiPo battery.

-Falcon or APC 12x6 E prop (NOT the slow fly version!).

-52mm Extreme Flight spinner.

-2 18" extensions for the 2 rear servos and 2 6" extensions to go between the receiver and

the aileron servo leads. We recommend the Extreme Flight 28 AWG servo extensions to

save weight.

-Adhesive backed Velcro and Velcro strap for battery retention.

Please note: The Extreme Flight 4 in 1 airplane stand is invaluable when assembling our

aircraft, from the 48" size models right up to our 50cc models. I can't imagine assembling

all of the aircraft I do without the aid of this inexpensive yet handy tool!

https://extremeflightrc.com/4-in-1-Airplane-Stand_p_1892.html

www.modellmarkt24.ch

Содержание A173V2-O



















Результаты поиска

Содержание A173V2-O

Отзывы:

Похожие инструкции для A173V2-O

Бренды по названию

Популярные бренды

Extreme Flight A173V2-O, Руководство пользователя

Результаты поиска

Содержание A173V2-O

Отзывы:

Похожие инструкции для A173V2-O

Бренды по названию

Популярные бренды