21. Mount the tiller arm as shown and insert the ends of the springs into the holes in the
ends of the arms and bend to secure.
22. Next let’s install the motor/engine. We have made this process very
easy. The center
and offset marks have been scribed into the front
of the firewall with a laser. Print out the
engine mounting template for your chosen engine. If using the DA-50 simply drill the
firewall at the locations laser scribed on the firewall. If using another make tape the
template onto the front of the firewall making sure to align the horizontal and vertical
lines on the template with the laser scribes lines on the firewall. Be sure to use the offset
line to the right of the vertical center line to accommodate for the motor offset due to the
built in right thrust angle in the motor box.
22
