40
Miscellaneous
When you replace the lamp while using it due to a malfunction, take time until the lamp is cooled
down completely.
The lamp can be broken. Pay attention when replacing it.
Replacing the Lamp
Turn off the projector and wait until the cooling down procedure
is completed. Then, remove the power cord from the power
consent.
Wait until the lamp is completely cooled down. And, turn the
projector upside down so that the bottom faces upwards.
Miscellaneous
Please purchase the new lamp unit under the following circumstances.
Time to Replace the Lamp
The projector lamp is not turned on or the screen disappears while it is in use.
Brightness and the quality of the projected image is deteriorated compared wit the initial usage.
The life of the lamp currently used for this projector is about 3000 hours.
However, it the lamp is not turned on, replace with new one regardless of the life
of the lamp.
Get a replacement lamp ready since the lamp can be broken before reaching 3000,
depending on the characteristics of the lamp and the operation environment.
Purchase the replacement lamp from the authorized dealer where you purchased the
projector.