24
Adjustments
Adjustments
Shortcut Key Functions
You can use several functions for adjustments by selecting the following shortcut key once on the
remote controller or the control panel of the projector.
Icon
Menu
Remote
controller
Control
Panel
Function Description
You can select a projected input signal among several projector
input signals.
Press the INPUT button. The input signal will be S-Video
Composite
Computer whenever you press this button.
You can display a small computer screen on the video screen,
or small video screen on the computer screen (PIP). or, you can
display the video screen and the computer screen by the same
size (PIP).
Press the PIP/POP button.
Display will be changed from "small computer screen/ entire
video screen"
"small video screen / entire computer screen"
"computer screen / video screen"
"video screen / computer
screen".
You can use this function when more than two input
signals are available. You should set to the Window
mode to adjust size and position of the PIP / POP
screen.
Using this button, you can adjust image projection if size of the
upper side does not match with that of the lower side.
1) Press the Keystone button.
2)
button:
Size of the lower side becomes narrower.
+ button:
Size of the upper side becomes narrower.
3) Press the INPUT/ESC button to exit from this function.
Use this button to compensate for the dark screen when
displaying the movie file in the PC.
Brightness and contrast will be improved at the same time.
1) Press the i-Brightness button.
2)
, + :
Function is set to on, and brightness and contrast will
be improved at the same time
This function is enabled for the computer input only.
INPUT
PIP/POP
Keystone
i-Brightness