Extraflame TERMOPELLET TC30, Руководство по установке

Страница: 9 / 56

MOUNTING PHASES
9
Chapter 3
MOUNTING THE REAR COVERING
Before connecting the hydraulic plant, it is necessary to mount the boiler rear covering.
The panel will be supplied with an already attached insulating layer, as illustrated in fi gure 3.2.
Cut the insulator (fi gure 3.3) where necessary to obtain the result illustrated in fi gure 3.4.
The cable gland holes indicated in fi gure 3 allow the passage of all electrical connections between boiler
and plant. The cables passing these holes to be connected to the boiler, will also have to be fi xed inside the
metal support of the electronic board, by means of a plastic band.
The rear covering will only momentarily be positioned as it will be subsequently fi xed to the other covering
parts.
Cable gland holes
fi gure 3.2 fi gure 3.3
fi gure 3.4