Extraflame FIANDRA IDRO, Руководство пользователя, Страница: 28 / 36

ENGLISH
every 7 days
burn Pot and Combustion
Chamber:
The burn pot is cleaned via a mechanical system
at pre-fixed intervals automatically by the boiler. It
is recommended to remove any residues using a
suction device.
Š
Suck up the ash deposited between separator
and fire door.
Š Remove the flame guard.
Š
Use a suction device to thoroughly clean the
combustion chamber and the bottom of the burn
pot.
After having cleaned the burn pot, always make
sure that:
Š
that it has been repositioned correctly, pellet
chute towars the pellet output (A).
Š
that the pellet chute assembly rests correctly
on the burn pot and not on any other surface of
the combustion chamber.
Š
that the chute assembly has been pushed
towards the fire wall (D) (to the right).
THE IMAGES ARE ILLUSTRATIONS ONLY.
A
burn Pot Cleaning detail
To clean the burn pot, the assembly must be removed by lifting it from the rear ("A" see illustration below).
Perform the same operation in reverse order to re-assemble.
After having re-positioned, always make sure:
• that the pellet chute assembly rests correctly on the burn pot and not on any other surface of the combustion chamber.
• that the chute assembly has been pushed towards the fire wall (B).
A
A
28