When unpacking the EtOH PRO use caution to not exert undue pressure on the lids and
connections attaching them to the base unit.
1) Remove the four support pillars at each corner of the box.
2) Remove the rear lid holster laying on top, and set aside.
3) Carefully remove the spit jar, reclaim jar holster, reclaim jar, and power cord from the multi-partitioned
cardboard support, and set aside. Remove the multi-partitioned cardboard support.
4) Remove the square box containing the kettle, remove kettle from box and set aside.
5) The only thing remaining in the box should be the EtOH PRO base platform with the kettle and reclaim
jar lids attached by vacuum hoses. The base is heavy, and the attached parts are cumbersome to move
so the help of a second person is advised. IMPORTANT: Carefully lift the base out of the box while
supporting both lids so they don’t get pulled, dropped, or otherwise undergo stress to the hose
connections and ports. If the hose connections and ports are corrupted the unit will not function.
6) Confirm all parts are accounted for, if there is anything missing contact customer service as soon as
possible.
UNPACKING INSTRUCTIONS
1) Connect the power cord to the back of the machine and plug into electrical socket.
2) Locate the power on/off switch on the back of the unit, set to “on” and confirm power
is being delivered by the illumination of the green Start/Stop button.
3) Connect the spit jar to the only unconnected tube coming from the back, bottom
corner of the unit. Use either port on the lid to connect and leave the second port open
and unattached.
4) Level the base using the adjustable feet. IMPORTANT: Make sure there is plenty of
clearance between the surface of the work space EtOH PRO is placed on and the
bottom of the unit. The air to cool and allow the unit to function properly depends on
air flow from the underside of the base.
5) Attach the reclaim holster to the left side (viewing from front), using the keyholes
cutouts on the holster to rest on the four pre-set protruding round head screws.
6) Attach the kettle lid holster to the back of the base, using the key holes cutouts on the
holster to rest on the four pre-set protruding round head screws.
7) Rest the empty reclaim jar in the holster.
8) Place the reclaim jar lid on the reclaim jar with hose inside jar.
9) Set altitude tuning
(see page….?)
SETTING UP EtOH PRO
