ALTITUDE TUNING
Altitude tuning is a ground breaking technology developed by ExtractCraft designed to allow
your EtOH PRO to work at peak performance regardless of vertical location. It is very
important to follow the below instructions and program EtOH PRO to the nearest 1,000 feet of
elevation.
The altitude only needs to be programed once and it will be stored as the default operating
altitude until it is reprogrammed otherwise.
NOTE:
While 'altitude' and 'elevation' are technically different, for our purposes we are using them
interchangeably as essentially meaning the same thing.
DETERMINING YOUR ALTITUDE
Option 1 - Ask Siri or Google Assistant,"What's my current elevation?"
Option 2 - Visit www.whatismyelevation.com and enter your current location.
STEPS TO SET ALTITUDE
1. Plug in EtOH and wait for the green button to illuminate.
2. Push and hold the button for a full 10-seconds and release.
3. Observe the lighted button flash quickly 10-times.
4. Push the button once for every 1,000 feet of elevation up to 8,000 feet:
Sea Level – push 0 times, wait 10-seconds for unit to reset
1,000 feet – push 1 time
2,000 feet – push 2 times
3,000 feet – push 3 times
4,000 feet – push 4 times
5,000 feet – push 5 times
6,000 feet – push 6 times
7,000 feet – push 7 times
8,000 feet – push 8 times
5. After you have entered your elevation EtOH Pro will pause for 10-seconds and the green illuminated
button will flash the same number of times it was pushed to confirm the setting, once for every 1,000 feet.
6. If the repeated number of flashes is correct you're finished and ready to start your extract crafting. If it's
incorrect repeat steps 1-6.
