5.4 Using the Matrix
The Power LED provides the following indications:
Colour
Description
Blue
The Matrix is active and fully controllable
Red
The Matrix is in standby mode, this state can be
changed by using RS232 or LAN commands, or from
the Web GUI interface.
5.4.2 Auto LED and Button
5.4.1 Power LED and Standby Mode
The green AUTO LED for both outputs A and B is lit when that channel has
its Auto Detection mode active. Auto Detection mode will detect any new
HDMI signals and immediate switch to the input. If the currently selected
input is removed then the switcher will switch to the next available input, or
remain on the current input if there are no active HDMI input signals.
The change the Auto Detection mode, press and hold the button for that
channel for 3 seconds until the Auto LED changes state.
5.4.3 Selecting Inputs
Manual Selection of the inputs is done by briefly pressing the push button
repeatedly for that channel until the desired input is selected. Manual
selection is always possible, irrespective of the Auto LED state. Selected
inputs that have no signal will be indicated by a flashing LED.
6 / 24
