Extra HDP-MXB42AP, Руководство пользователя

Страница: 23 / 26

r edid data hdmi y! Get the EDID data of the hdmi output y port
,
y=1~2 EDID : 00 FF FF FF FF FF
FF 00 ………
Audio Setup
s hdmi y arc z!
Turn on/off arc of HDMI output y
，
y=0~2(0=all)
z=0~1(z=0,off,z=1 on)
hdmi output 1 arc on
hdmi output 1 arc off
r hdmi y arc! Get the arc state of HDMI output y
,
y=0~2(0=all) hdmi out1 arc on
s spdif x mute y! Enable/disable the audio outputs . x=1~2(1=spdif
1 ,2=spdif 2 ) ,y=0~1( 0=unmute , 1=mute)
spdif 1 mute
r spdif x mute!
Read the audio output state. x=1~2(1=spdif 1,
2=spdif 2 )
spdif 1 mute
Network setting
r ipconfig! Get the Current IP Configauration
IP Mode: Static
IP: 192.168.1.72
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
TCP/IP port: 23
Mac address:
00:1C:91:03:80:01
r mac addr! Get network MAC address
Mac address: 00:1C:91:03:
80:01
s ip mode z!
Set network IP mode to static IP or DHCP,
z=0~1 (z=0 Static, z=1 DHCP )
Set IP mode:Static.
Please use "s net reboot!"
command or repower device
to apply new config!
r ip mode! Get network IP mode IP mode: Static
s ip addr xxx.xxx.
xxx.xxx!
Set network IP address
Set IP address:192.168.1.
100
.
Please use "s net
reboot!" command or
repower device to apply
new config! DHCP on,
Device can't config static
address, set DHCP off first.
r ip addr! Get network IP address IP address:192.168.1.100
s subnet xxx.xxx.
xxx.xxx!
Set network subnet mask
Set subnet Mask:255.255.
255.0
.
Please use "s net
reboot!" command or repower
device to apply new config!
DHCP on, Device can't
config subnet mask, set
DHCP off first.
21 / 24