- 17 -
UTRACK MVT600 User Guide Version 3.0
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
Heartbeat Report
Turn on heartbeat report
You can define heartbeat interval on tap III
Main Settings.
Heading Change Report
Auto report when MVT600’s direction changes over predefined angle
You can define angle degree on tap III
Main Settings
.
Distance Interval Report
Track by distance.
Interval can be changed on tap III
Main Settings
.
Tow Alarm
Alarm when the tracker trembles for a period of time.
You can define tow time on tap III
Main Settings.
RFID
RFID data.
For more information about GPRS settings, please refer to SMS/GPRS Protocol.
7 Installation
7.1 Install I/O Cable
The I/O cable is a 12-pin cable including power, analog input, negative/positive input and output.
I/O
1
Power(+)
3
Input 3
5
Input 2
7
Output 1
9
Output 2
11
Output 3
2
GND(-)
4
Input 1 (-)
6
GND(-)
8
AD Input 1
10
AD Input 2
12
AD Input 3
PIN Number
Color
Description
1 (Power)
Red
DC In (power source). Input voltage: 9V~36V. 12V suggested
2 (GND)
Black
Ground
3 (IN3)
White
Digital Input3. Positive triggering, for detecting status of vehicle door or ACC.
4 (IN1)
White
Digital Input1. Negative triggering( Defaulted as SOS Panic Button)
5 (IN2)
White
Digital Input2. Negative triggering, for detecting status of vehicle door.
6 (GND)
Black
Ground. It can be used to connect with temperature/fuel sensor etc.
7 (OUT1)
Yellow
Output1. It can be used to connect with relay for engine immobilization.
Low voltage (0V) when effective and open drain when ineffective.
Output open drain sink voltage (ineffective): 45V max.
