Extra Miles UTRACK MVT600, Руководство пользователя

Страница: 16 / 22

- 16 -
UTRACK MVT600 User Guide Version 3.0
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
the times.
IP & Port Input server ’s IP address and port number.
Secondary IP and Port
(Backup Server)
Input backup server ’s IP address and port number to avoid data losing
when main server is down. The backup server
will receive data
automatically.
APN
APN user name
APN password
APN, APN username, APN password: max 32 bytes.
If no username and password required, leave them blank.
Tracker ID MVT600’s IMEI. It is the only ID in GPRS packet.
Read Read current tracker’s settings for above items.
Write Write above settings to the tracker.
T ick the box for receiving GPRS report.
Event Description:
Event Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
SOS/Input 1 Active Report when input1 (SOS) is active/pressed.
Input 2 Active Report when input 2 is active.
Input 3 Active Report when input 3 is active.
SOS/Input1 Inactive Report when input 1 inactive (SOS released).
Input 2 Inactive Report when input 2 inactive.
Input 3 Inactive Report when input 3 inactive.
Low Battery Report when backup battery’s voltage is below 3.5V.
Low External Power External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding Report when MVT600 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence Report when MVT600 enters Geo-fence.
Exit Geo-fence Report when MVT600 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings .
External Power On Alarm when external power supply is on or recover.
External Power Off Alarm when external power supply if off or cut.
No GPS Signal Report when MVT600 enters GPS blind area or no GPS signal.
Get GPS Signal Report when MVT600 exits GPS blind area or get GPS signal.
Enter Sleep Report when MVT600 enters sleep mode.
Exit Sleep Report when MVT600 exits sleep mode.
Sleep mode can be changed on tap III Main Settings .
GPS Antenna Cut Alarm when the GPS antenna is disconnected or cut
Device Reboot Report when MV600 is rebooting.