Exterior NVR21 Series, Руководство пользователя

Страница: 221 / 262

209
Parameter Function
Alarm Out Please select corresponding alarm output channel when an alarm
occurs. You need to check the box to enable this function.
Latch The alarm output can delay for the specified time after an alarm stops.
The value ranges from 1s to 300s.
Show
message System can pop up a message to alarm you in the local host screen if
you enabled this function.
Alarm
upload System can upload the alarm signal to the centre (Including alarm
centre.
Send
Email If you enabled this function, System can send out an email to alert you
when an alarm occurs.
Buzzer Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
7.9.4
Storage
7.9.4.1 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 7-80.
There are four record modes: general (auto), motion detect, alarm and MD&alarm. There are six
periods in one day.
You can view the current time period setup from the color bar.

Green color stands for the general record/snapshot.

Yellow color stands for the motion detect record/snapshot..

Red color stands for the alarm record/snapshot.

Blue color stands for MD&alarm record/snapshot.
Figure 7-80