Step 8- Lay down the 2 black brackets
inside your vehicle and line up the 4
hole locations. The parts look similar
however the 90 degree bends on the
brackets need to be facing the out.
(see photo)
Start with the front 2 holes. Finger
tighten the 2 factory bolts into the 2
front EMS bracket holes. Now line up
the 2 rear holes and finger tighten the
2 remaining factory bolts. Finger
tighten all 4 holes with seat still out.
o
Step 9- Place the seat back into the
vehicle. Line up seat front holes with
EMS front holes. Finger tighten front
2 feet with provided black EMS bolts.
Press seat lever and slide seat to the
most up front position. Go to back
seat and screw down the remaining 2
factory feet with the stainless EMS
bolts.
INSTALLATION GUIDE RAV4 (2006-2011)
