Step 4- (Optional Step. You do
not have to unplug the cables)
Unplug the 3 factory cables
plugged into your car seat
under the front portion of the
seat. No tools required.
Remember to plug these back
in after you have completed
the install.
(YOU MAY ALSO CHOOSE TO NOT UNPLUG THE CABLES AND LAY THE
SEAT ON THE REAR SEAT OF THE VEHICLE, SKIP TO STEP 7)
Step 5- Remove your car seat carefully. (approximate weight is 25 pounds)
Step 6- Place your driver’s seat on a bench or on the ground on a clean sheet,
towel etc...(don’t want to et it dirty)
Step 7- Grab the 2 extendmyseat brackets
INSTALLATION GUIDE RAV4 (2006-2011)
