Extel VisioSmart 720303, Инструкция по установке и эксплуатации

Страница: 51 / 88

GB2
CFI EXTEL - VISIOSMART - 09/2017
1.
SAFETY INSTRUCTIONS
Important!
• Please read the user manual carefully before installing or using this product.
• If you are installing this product for a third party, please remember to leave the manual or a copy of it with the
end user.
• The user of this product is responsible for its use and must verify that such use complies with the video surveil-
lance laws in force in the country in which it is used. In France, please contact the prefecture of your department.
Outside of France, contact the authorities in charge of the use of video surveillance products (Directorate of
Civil Liberties, Bureau of General Regulations, etc.)
Warning:
• The various components may only be dismantled by an authorised technician.
Safety precautions:
• To ensure the safe operation of the system, installers, users and technicians must follow all the safety procedures
described in this manual.
• Specific warnings and warning symbols are marked on the components where necessary.
• Implementation must be carried out according to the standards in force in the country in which the product is
installed (NFC 15-100 for France).
2.
CONTENTS OF THE KIT
1. 2. 3.
4.
6.
5.
7.
1 • Intercom panel 4 • Power cable 7 • Quick start guide
2 • Intercom panel and rainproof shield 5 • 3 cables for the buzzer, strike plate and gate
3 • Power 6 • Pack of screws
To take full advantage of your IP intercom panel, we advise that you set it up before permanently installing it. Con-
necting it on the table is therefore necessary.