
GB
CFI EXTEL SUNLIGHT 4 - 05/2010 - V1
GB
CFI EXTEL SUNLIGHT 4 - 05/2010 - V1
MAINTENANCE
It is advisable to clean the panel regularly for optimum recharge capacity. The guarantee is void if parts have been
dismantled. Clean the outside with a soft dry cloth only.
Warning:
Do not use any carboxylic acid or alcohol-based or other similar product or solvent. In addition to the
risk of damage to your device, fumes are also dangerous to health and are explosive.
For cleaning purposes do not use any tool that may act as a voltage conductor (e.g. metal brush or sharp tool) or
that could potentially scratch the glass.
TECHNICAL ASSISTANCE - GArANTEE
Test :
A test button is available for checking that the system is operating correctly (a) (fig.3).
1. Set the switch to oFF (b).
2. Press the test button (a).
The green lights (c) («battery» and «solar») come on. The system is working properly. If this is not the case then
please see the instructions below.
Fault
Cause
Solution
The «solar» LED does not
come on during testing, the
panel will not charge.
- there is insufficient daylight
- connection issue
- check that the panel is not in the shade or
hidden from the sun
- check that the panel has been installed correctly
- check that the panel is clean
- check the connection between panel and box
The «battery» LED does
not come on during testing,
the battery has not been
sufficiently charged (<11V).
- connection issue
- charging problem
- check the connection between battery and
box card
- you have not had sufficient lighting, recharge
the battery other than with the panel
The bulb does not come
on when the switch is
pressed.
- connection issue
- the box switch (b) is set to
oFF
- the bulb is not screwed in
properly
- battery is below 9V
- check the switch/box and bulb/box connections
- turn the box switch to «on»
- screw the bulb back in
- recharge the battery
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE :
0892-35-00-69 (0,337
€
ttc/min)
Last version of the dowloadable manual in color on :
www.cfi-extel.com
GUARANTEE CoNDITIoNS :
This device is guaranteed for labour and parts in our premises.
The guarantee does not cover: the consumables (batteries, etc.) and the damages caused by: misuse,
improper installation, external intervention, deterioration by mechanical or electrical shock,
fall or atmospheric phenomenon.
The sales slip or the invoice is required as proof of purchase date.
5
6
SAFETY INSTrUCTION
The damages caused by the non-compliance to the manual lead to the expiration of the warranty. We will not
assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people, caused by improper handling
or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep this status and
ensuring the best operation of the product, the user must respect the safety instructions and warnings contained
in this manual.
This symbol indicates a risk of electric shock or a risk of short circuit
- Make sure all electrical connections of the system are compliant with instructions of use.
- In schools, training institutions and workshops… the presence of a qualified personnel is necessary to control the
operation of electronic appliances.
- Respect the instructions of use of other appliances connected to the system.
- Please contact an experienced person in case of doubt concerning the mode of operation or the safety of the
appliances.
- Never connect or disconnect the electrical appliances with wet hands.
- When installing this product, check the power supply cables are not liable to be damaged.
- Never replace the damaged electrical cables by yourself! In this case, remove them and contact an experienced
person.
WArNING
Informs the user about the presence of important instructions concerning the use
and the maintenance (repair) in the documentation supplied with the appliance.
Informs the user about the presence of “hazardous voltages” non-isolated inside the housing of
the product, being sufficiently high to represent a risk of electrocution for people.
7