VIR50-EU-EN v2.3 5/14
15
Alarm Low
Use the
▲
and
▼
buttons enable or disable the alarm. If the low alarm is enabled, press the
ENTER button to adjust its value; use the
▲
and
▼
buttons to adjust the value. Press the ENTER
button to confirm and then press the ESC button to exit and save.
Laser
Press the ENTER button to enable or disable the laser.
Auto Mode (Measure Lock)
Press the ENTER button to enable or disable auto mode.
Max/Min
Press the ENTER button to set the MAX/MIN mode ON or OFF. The MAX/MIN mode displays the
highest (MAX) and lowest (MIN) IR temperature.
Average/Dif
Press the ENTER button to switch ON or OFF the Average or Differential IR temperature.
Ambient TEMP/% RH
Press the ENTER button to switch the air temperature and relative humidity displays ON or OFF.
Dew-point/wet bulb temperature
Press the ENTER button to switch the dew-point and wet bulb temperature ON or OFF.
