VB300 V1.1 11/10
6
INSTALLING THE USB DRIVER
The PC will prompt for the USB Driver installation immediately after the main software program is installed. A
window similar to the one shown below will appear to prompt for the installation. Simply click INSTALL to continue.
To install the driver manually, plug the VB300 into an available USB port on the PC. If this is the first
time that the
VB300 is connected to the particular port on the PC, the following screen will appear:
Make sure the program disk is still in the PC CD-ROM drive. Select the ‘recommended’ installation and follow the
on-screen prompts to complete the driver installation. If this is a repeat connection of the VB300 to the USB port,
the driver installation process will be automatically skipped.
RUNNING THE DATALOGGER SOFTWARE
With the VB300 inserted in the PC’s USB port, double-click the program icon (located on the desktop) to launch the
program. The main software screen will appear.
Instructions for using the Datalogger Software are contained in the HELP Utility available from the HELP menu in
the software program. Please read the HELP Utility thoroughly in order to fully understand the software and the
related functionality of the VB300.
Note:
When the VB300 is connected to the USB port, its battery discharges at a higher rate than normal. To
conserve battery life, do not leave the VB300 connected to the USB port for a prolonged period of time
.
