SD700-EU-EN V2.4 07/13
6
Advanced Settings
The SET function is used to accomplish the following:
Format the SD memory card
Set the date and time
Set the sampling time
Set the beeper sound ON/OFF
Set the SD card decimal/comma character
Select the units of measure for temperature and barometric pressure
Set the RS232 data output ON/OFF
Note:
The datalogger function must be switched OFF before attempting to enter the Advanced
Settings mode.
Press and Hold the SET button for >2 seconds. The first function (Sd F) will appear in the display.
Press the SET button to step through all of the functions. Use the
▲
and
▼
buttons to adjust the
selected function. Use the “LOG” button to step through fields within a function. In the SET mode, if
no button is pressed within 5 seconds the logger will revert to the standard mode.
1.
Sd F –
Format the SD card. Press the
▲
button to select yES or no. For yES, press the Enter
button. When yES and Ent appear, press the Enter key again to format the card and erase all
existing data. The screen will display a flashing yEs and ESC while the memory is being
erased and formatted.
2.
dAtE:
Set the date and time. Press the
▲
or
▼
buttons to adjust the selected field. Press the
Enter button to store the value and to step through the various fields.
3.
SP-t:
Set the sample rate. Press the
▲
button to select the desired sample rate and press
Enter to store the selection. The selections are: 5, 10, 30, 60, 120, 300, 600 seconds and
AUTO. In AUTO, the data will be stored every time there is a value change of >1% RH OR
>1°C
4.
bEEP:
Set the beeper ON or OFF. Press the
▲
button to select ON or OFF and press Enter to
store the selection.
5.
dEC:
Set the SD card decimal character. Press the
▲
button to select USA (decimal) or Euro
(comma) and press Enter to store the selection.
6.
t-CF:
Set the Temp. unit to °F or °C and press Enter to store the selection.
7.
rS232:
Set the RS232 data output ON/OFF. Press the
▲
button to select ON or OFF and
press Enter to store the selection.
8.
Baro:
Set the unit of measure for barometric pressure. Use the
▲
button to select inches of
mercury (InHg), millimeters of mercury (-Hg), or hectoPascal (hPa).
9.
ESC:
Exit the setting mode. Press the SET button to return to normal operation.
System RESET
If a condition appears where the CPU does not respond to keystrokes or the meter seems frozen,
press the RESET button on the side of the datalogger (use a paper clip or similar pointed object) to
return the meter to a working state.
RS232 Interface
A serial output is provided to link the meter to a PC’s serial port. Call Technical Assistance for more
information on this interface.
