Extech Instruments S4500THS, Руководство пользователя

Страница: 22 / 25

Character Control Hex/Dec Control Action
EXTEND ^\ 0x1C/28
Extended Print
All characters following this command
are printed double high .
EXTEND
OFF
^] 0x1D/29
Extended Print Off/Normal Print
All characters following this command
are printed normal height .
Height Control Commands
Note: Default printer settings are set to Normal Print.
Character Width Control Commands
A single byte control command is defined to control the printed character
width.
Shift Out
SO ^N 0x0E / 14
Each dot of the Character bit- Map is burned twice
Shift In
SI ^O 0x0F / 15
Each dot of the Character bit - Map is burned once
Character width control commands
Note: On power up the printer defaults to a single character width mode.
Reverse Printing Command
The reverse printing command enables the user to print in white letters on a
black background. Below are the command structure details.
Command String Action Taken
Esc – ‘U’ – ‘R’
Enable reverse printing starting with the
characters following the command. The
reverse printing is terminated by the Disable
Reverse Command or by cycling the power.
Esc – ‘U’- ‘n’
Disable reverse printing starting with the
characters following the command. The
disable reverse printing is terminated by the
Enable Reverse Command or by cycling the
power.