Extech Instruments RH600, Быстрый старт

Страница: 4 / 8

HOME PAGE
Short press F2 to switch ON the RH600. The Home page, shown
below, will appear.
1. Battery voltage status.
2. Temperature reading.
3. Selectable reading.
4. Programming menu (press F3).
5. Data Hold (press F2).
6. View real-time readings plotted on
graphs (press F1).
7. Selectable reading.
8. Temperature reading bar graph.
9. Selectable pressure value.
10. Time (hours and minutes).
CONTROL BUTTONS
The function buttons (F1 , F2 , and F3 ) are located directly
below the display. The function that is selected by pressing one of
these buttons is dependent on the icon directly above it, in most
cases. The only exception is the F2 power ON/OFF functions; short
press F2 to power the meter ON, long press F2 to power OFF. The
four arrow buttons (
) are used to navigate and change set-
tings in menus.
From the Home page, press F1 to view real-time readings plotted
on graphs.
When you select View Data File in the Recording menu, and then
open a data file, press F3 to view the readings plotted on graphs.
1 S
While viewing real-time readings on a graph, press F2 to set the in-
terval of time between readings. The options are 1, 5, or 30 sec-
onds (S) and 1, 5, or 10 minutes (min).
HOLD Data Hold mode. Press F2 to freeze readings.
#NAS100115; r. AC/86475/86475; en-US 3