Extech Instruments RH600 Скачать руководство пользователя страница 2

Страница: 2 / 8

Quick Start (en)

INTRODUCTION

The RH600 measures temperature and relative humidity, with the
detachable RH601 probe, and calculates other readings, including
dew point and frost point.

The threaded probe can be directly mounted in a process or held
freely in ambient air.

The RH600 can record up to 32,000 readings using the Data Log-
ger and Data Hold functions. Readings can be viewed directly on
the RH600 display or on a PC. For complete information, refer to
the user manual available on the Extech website.

QUICK STEPS

1. Insert the supplied battery in the rear battery compartment. The

compartment is secured by one screw.

2. Connect the probe to the port at the bottom of the meter. The

connection is keyed so the probe connector can only be in-
serted in one orientation. Secure the connection by tightening
the knurled screw.

3. Remove the probe’s protective cap and mount it in the process

under test or hold it in ambient air.

4. Short press the orange F2 function button

to power the meter,

the Home page will appear after several seconds.

5. Read the three displayed readings. The temperature measure-

ment, shown at centre, is fixed. The other two readings can be
selected in the programming menu. Press the left or right arrow
button to view the readings in a summary format.

6. Press F1

under the graph icon

to view readings in real-

time, plotted on a graph. The graph icon will then appear above
F3. Use F3 to step through all the graphs.

7. While viewing a real-time reading graph, press F2 to set the in-

terval of time between readings from 1 second (1 S) to 10 mi-
nutes (10 min).

8. Press F1 under the return arrow icon

to exit a menu.

9. Press F3

under the menu icon

to open the programming

menu.