background image

                                                                   15                          

RH520A-en-GB_v4.8   6/19

 

 

Alarm Conditions and the Alarm History 

When in Standard View mode: 

 

If the ALARM display icon is flashing – an Alarm condition currently exists. 

 

If the ALARM display icon is ON steady – there are past Alarms to view in the Alarm history. 
Use the ALARM button to view the Alarm history as described elsewhere in this manual. 

 

If an Alarm is tripped, press the ALARM button to silence it. 

 

Press and hold the SET button for 2 seconds to clear an alarm through the external relay 
module. 

When in Alarm View or Time View mode: 

 

If the ALARM display icon is flashing – the cursor is currently on an Alarm condition. 

 

If the ALARM display icon is ON steady – there are past Alarms to view in the Alarm history. 
Use the cursors or the ALARM button to view the Alarm history as described elsewhere in this 
manual. 

Note that the Alarm display icon and the external alarm relay module can be controlled 
separately as indicated in the statements above. 

Battery Replacement 

The 5-segment battery life indicator allows the user to track the status of the battery. When all 
5-segments are dark, the battery is fully charged. Segments switch off as the battery ages. When 
the battery indicator has only one segment left the batteries must be replaced immediately. 

1.

 

Open the battery compartment on the rear of the instrument 

2.

 

Remove the old batteries and replace with three (3) heavy duty alkaline ‘AA’ batteries 
observing polarity 

3.

 

Replace the battery compartment cover securely 

4.

 

The RH520A will require a “Programming Reset” to reset the display. Press the RESET 
button located inside the battery compartment.  “Reset” clears all settings. Time, Date 
and the logging interval need to be entered. The measurement data and alarm history, 
however, will still be retained in the non-volatile memory. 

 

You, as the end user, are legally bound (Battery ordinance) to return all used batteries 
and accumulators; disposal in the household garbage is prohibited! 

You can hand over your used batteries / accumulators, gratuitously, at the collection 
points in our branches in your community or wherever batteries / accumulators are sold! 

Disposal 

Follow the valid legal stipulations in respect of the disposal of the device at the end of its 
lifecycle 
 

 

Содержание RH520A

















Отзывы: