9
Features
Analog Bargraph display
Visual indication of measurement in the tradition of an analog meter
pointer. The bargraph consists of 52 discrete viewing segments. The
bargraph is useful for detecting faulty contacts, identifying
potentiometer gradations, and viewing signal spikes.
True RMS vs. Average Sensing (AC Measurements)
True RMS meters can accurately measure non-sinusoidal waveforms,
as well as distorted sine waves that contain harmonics. Average
Sensing is a fast, accurate and cost effective method of measuring
pure sine wave signals. However, non-sinusoidal waveforms cannot
accurately be measured using Average-sensing techniques.
Backlit display
The MultiLog™ is equipped with a backlight for viewing the LCD
display in poorly lit areas.
Data Hold
The
HOLD
function freezes the reading on the display for later
viewing.
Manual and Automatic Ranging
The MultiLog™ series multimeters are Autoranging, with manual
override.
Smart Power Auto Power Off
Smart Power shuts the meter down automatically after approximately
17 minutes of inactivity.
Audible Beeper
To disable the audible meter tones, press and hold the Hz key while
powering the meter.
Automatic Test Lead Resistance Compensation
Automatically compensates for the resistance of the test leads, as well
as the internal protection circuitry automatically, ensuring greater
accuracy of low resistance measurements.
Datalogging
The MultiLog™ series of multimeters store reading for review on the
LCD display or downloading to a pc using the supplied software.
