Extech Instruments MS6060, Руководство пользователя, Страница: 48 / 87

48 MS6000-EU-EN-V1.3 7/12
4.5.2 MEASURE
Push the MEAS key to view the following menu.
There are 23 types of measurements and up to 8 can be displayed at a time.
Options Settings Comments
Modify (F5) Press F5 to Select the measure Source and Type.
Source (F1)
CH1
CH2
Select the measure source.
Type (F2) Frequency Calculate the waveform frequency by measuring the first cycle.
Period Calculate the time of the first cycle.
Average/Mean Calculate the arithmetic mean voltage over the entire record.
Pk-Pk
Calculate the absolute difference between the greatest and the
smallest peaks of the entire waveform.
CRMS
Calculate the actual RMS voltage measurement of the first
complete cycle of the waveform.
Minimum
Examine the waveform record of all points in the current window
and display the minimum value.
Maximum
Examine the waveform record of all points in the current window
and display the maximum value.
Rising
Measure the time between 10% and 90% of the first rising edge
of the waveform.
Falling
Measure the time between 90% and 10% of the first falling edge
of the waveform.
+ Width
Measure the time between the first rising edge and the next
falling edge at the waveform 50% level.
- Width
Measure the time between the first falling edge and the next
rising edge at the waveform 50% level.
Delay 1-2 ↑ The delay of the rising time between Channel 1 and Channel 2
Delay 1-2 ↓ The delay of the falling time between Channel 1 and Channel 2
+ Duty
Positive duty cycle =(Positive pulse width)/Period x 100%.
Measured from the first waveform.
- Duty
Negative duty cycle =(Negative pulse width)/Period x 100%.
Measured from the first waveform.
Base
Voltage of the statistical minimum level, measured over the entire
waveform
Top
Voltage of the statistical maximum level, measured over the
entire waveform
www.burntec.com