MO297-EU-EN V4.3 4/13
7
Moisture Alarm Set Procedure:
1.
With MOIST displayed, simultaneously press the MOIST and MODE buttons.
2.
The “HIGH” icon will appear on the display.
3. Press
the
▲
or
▼
button to set the high limit desired.
4.
Press the STORE/ALARM SET button to save the value and proceed to the LOW set value.
5.
With the “LOW” icon in the display, Press the
▲
or
▼
button to set the low limit desired.
6.
Press the STORE/ALARM SET button to save the value and to return to the normal mode.
7. If the moisture measurement is lower than the LOW alarm setting, the meter will beep once
every second
8. If the moisture measurement is higher than the HIGH alarm setting, the meter will beep
continuously.
Data Memory Storage
Storing Readings:
1.
With the data to be saved in the display, press the
STORE
button for 2 seconds until the unit
beeps. The data will be saved to the memory location indicated. The numeric display above
the
MEM
icon will then advance to the next location.
2.
When the 20 memory locations are full, the unit will overwrite old saved readings starting with
memory location 01.
Recalling Stored Readings:
1.
Simultaneously press and release the
▲
and
▼
buttons to display stored readings. The
numeric display above the
MEM
icon will flash and the data stored in that location will be
displayed.
2. Press
the
▲
or
▼
button to scroll through the memory locations.
3.
To return to normal operating mode, press the
STORE
button.
Clearing Stored Data:
1.
To clear stored data, press and hold the
▲
and
STORE
buttons simultaneously until
CLR
appears on the display.
Auto Power Off
The meter will enter a sleep mode after 30 minutes of inactivity. The meter will emit a warning beep
15 seconds before shutting down.
To disable the APO feature, press the MODE button when turning the meter ON. The “APO” icon
will not appear, indicating it is disabled.
