MO270-EU-EN-v2.1 11/12
4
Analyzer Side Views
1. Sensor release buttons
2. Ports reserved for future options
3. RJ-45 remote probe port
4. Sensor (transmitter) mini-USB charge-port
5. Mini-SD card slot
6. Analyzer (receiver) mini-USB charge-port
Analyzer Components
1. Cap with built-in calibration check
2. Measurement contact pins
3. Non-Contact capacitive sensor (transmitter)
4. Power button for sensor (used only when sensor is disconnected from receiver)
5. Lithium polymer battery shut-off switch for Sensor (transmitter); (used when
shipping/transporting the unit or when the unit is to be stored unused for long periods.
6. Lithium polymer battery shut-off switch for Analyzer (receiver)
7.
Analyzer (Receiver) unit
IMPORTANT NOTE:
The MO270 is shipped with the two ON/OFF slide switches set to OFF. Please
refer to the diagram above to locate these switches. Please switch these ON in order to permit
proper meter operation.
