MO260-en-GB_V1.5 8/16
6
LCD Backlight ON/OFF
With the meter switched ON, pressing and holding both front panel buttons (MODE and HOLD)
switches the LCD backlight ON and OFF.
Data Hold feature
The Data Hold function freezes the reading in the display. Press the
HOLD
key momentarily to
activate the Data Hold function. The reading will freeze and the ‘key’ display icon will appear. Press
the
HOLD
key again to exit the Data Hold function (the ‘key’ display icon will switch off).
Meter Setup
To enter the setup mode:
With the meter switched OFF, press and hold both front panel buttons (MODE and HOLD
buttons) simultaneously for two seconds. The display should now read ‘0 = x’ where ‘0’ is the
OPTION and ‘x’ is the SETTING.
Use the MODE (right arrow) button to change the SETTING.
Use the HOLD button to scroll through the OPTIONS.
The available OPTIONS and SETTINGS:
OPTIONS
SETTINGS
SET-UP INFORMATION
0
0
Switches all settings to ‘0’ (Factory Default*)
1
Others settings can now be changed. In addition, Backlight
switches ON for 30 seconds and then automatically switches
OFF.
1
0
Audible alert beeps with increasing frequency from a nominal
17.0 (REL) or 17% (WME) measurement value upwards
1
Audible alert divided into 3 frequency levels
2
Audible alert beeps when user switches from one mode to
another
3
Beeper OFF. Audio alert display symbol switches OFF
2
0
Auto Switch OFF is not active. User must manually switch the
unit OFF
1
Auto Switch OFF active. Switches OFF after 3 minutes
2
Auto Switch OFF active. Switches OFF after 5 minutes
3
Auto Switch OFF active. Switches OFF after 10 minutes
3
0
Backlight OFF
1
Backlight ON
*FACTORY DEFAULT SETTINGS: 0=0, 1=0, 2=0, 3=0
