Extech Instruments MO210, Руководство пользователя

Страница: 5 / 6

MO210-en-GB_V2.4 7/15 5
Battery Replacement
If the instrument does not switch on, displays the low battery symbol, or if the Battery Check yields
less than 44% on the wood moisture scale, replace the batteries as follows:
1. Remove the Phillips head screw from the belt clip/battery compartment located on the
rear of the instrument.
2. Remove the batteries taking note of their orientation and polarity.
3. Install three (3) new CR-2032 button batteries observing polarity.
4. Secure the battery compartment with the Phillips head screw.
You, as the end user, are legally bound ( EU Battery ordinance ) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over your
used batteries / accumulators at collection points in your community or wherever batteries
/ accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle.
Battery Safety Reminders

Please dispose of batteries responsibly; always observe local, state, and federal regulations
with regard to battery disposal.

Never dispose of batteries in a fire. Batteries may explode or leak.

Never mix battery types. Always install new batteries of the same type.
Electrode Pin Replacement
To replace the two electrode pins:
1. Remove the protective cap
2. Unscrew the electrode pins
3. Install the new pins
4. Replace the protective cap
Maintenance

Always keep the instrument dry

Prevent dirt from accumulating at the electrode pins