background image

9                                             MC108  V1.1   2/09 

 

 

Support line (781) 890-7440 

Technical Support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice 

For the latest version of this User Guide, Software updates, and other up-to-the-minute product information, 

visit our website: www.extech.com 

Extech Instruments Corporation, 285 Bear Hill Road, Waltham, MA 02451 

Specifications 

Sensor element 

300,000 pixels CMOS 

Lens 

High sensitivity lens 

Auxiliary light 

White LED × 3 with super high brightness 

LCD screen 

1.8” TFT color LCD screen 

Memory 

2MB Data FLASH -- capacity ~ 60 pictures 

Linkage USB 

2.0 

Magnifying rate 

Optical zoom 1 ~ 7x and 27x. Digital zoom 4x. 

Plug 

DC IN terminal (mini USB plug) 

Power 

3 x AAA, RO3, 1.5V alkaline batteries or 3 x 1.2V Ni-MH 
rechargeable batteries. 
AC transformer (Output: DC 5.0V/1000mA; Input: AC 100-240V 
50/60Hz). 

Current consumption 

Maximum = 220mA (with LEDs on at highest illumination) 

Size 

120 × 56 × 25 mm 

Weight 

Approximately 70 grams (not including batteries) 

Operational temperature  -5ºC ~ 50ºC 

Environmental humidity:    Below 85% (no dew) recommended 

 

Warranty 

EXTECH INSTRUMENTS CORPORATION

 (A FLIR COMPANY) warrants this 

instrument to be free of defects in parts and workmanship for 

one year

 from date of 

shipment (a six month limited warranty applies to sensors and cables). If it should 
become necessary to return the instrument for service during or beyond the warranty 
period, contact the Customer Service Department at (781) 890-7440 ext. 210 for 
authorization or visit our website 

www.extech.com

 for contact information. A Return 

Authorization (RA) number must be issued before any product is returned to Extech. 
The sender is responsible for shipping charges, freight, insurance and proper 
packaging to prevent damage in transit. This warranty does not apply to defects 
resulting from action of the user such as misuse, improper wiring, operation outside of 
specification, improper maintenance or repair, or unauthorized modification. Extech 
specifically disclaims any implied warranties or merchantability or fitness for a specific 
purpose and will not be liable for any direct, indirect, incidental or consequential 
damages. Extech's total liability is limited to repair or replacement of the product. The 
warranty set forth above is inclusive and no other warranty, whether written or oral, is 
expressed or implied. 

 
 
 
 
 
 
 
 
 
 
 

Copyright © 2009 Extech Instruments Corporation (a FLIR company). 

All rights reserved including the right of reproduction in whole or in part in any form. 

Содержание MC108










Отзывы: