background image

HD400-EN V2.4   07/13 

10 

Garantie 

FLIR Systems, Inc. garantit que cet appareil Extech Instruments

 est exempt de défauts matériaux et de fabrication pendant 

trois ans à partir de la date d’envoi (une garantie limitée de six mois s’applique aux capteurs et aux câbles). Si le renvoi de 
l’appareil pour réparation devient nécessaire durant ou après la période de garantie, contactez le service client pour 
autorisation. Pour obtenir les coordonnées, visitez le site Web suivant : www.extech.com. Un numéro d’autorisation de retour 
(AR) doit être délivré avant tout retour de produit. L’expéditeur prend à sa charge les frais d’expédition, le fret, l’assurance et 
l’emballage correct de l’appareil afin de prévenir toute détérioration durant le transport. Cette garantie ne s’applique pas aux 
dommages imputables à l’utilisateur, tels que l’usage impropre ou abusif, un mauvais câblage, une utilisation non conforme aux 
spécifications, un entretien ou une réparation incorrecte, ou toute modification non autorisée. FLIR Systems, Inc. déclinera 
spécifiquement toute garantie ou qualité marchande ou aptitude à l’emploi prévu, et ne sera en aucun cas tenu responsable 
pour tout dommage conséquent, direct, indirect ou accidentel. La responsabilité totale de FLIR est limitée à la réparation ou au 
remplacement du produit. La garantie définie ci-dessus est inclusive et aucune autre garantie, écrite ou orale, n’est exprimée ou 
implicite.

 

Calibrage, réparation et services après-vente 

FLIR Systems, Inc. offre des services de calibrage et de réparation

 pour les produits Extech 

Instruments que nous commercialisons. Nous fournissons également une certification NIST pour la 
plupart des produits. Contactez notre service client pour toute information sur les services de 
calibrage disponibles pour ce produit. Un calibrage doit être effectué chaque année pour vérifier 
les performances et la précision du mètre. Nous offrons également une assistance technique et un 
service à la clientèle. Veuillez vous reporter aux coordonnées fournies ci-dessous. 

 

 

Copyright 

©

 2013 FLIR Systems, Inc. 

Tous droits réservés, y compris la reproduction partielle ou totale sous quelque forme que ce soit. 

www.extech.com 

Lignes d’assistance: États-Unis (877) 439-8324; international: +1 (603) 324-7800

 

Service d’assistance technique : Option 3 ; E-mail : [email protected] 

Réparations et retours : Option 4 ; E-mail : [email protected] 

Les spécifications produit sont sujettes à modifications sans préavis. 

Pour les toutes dernières informations, veuillez visiter notre site Web. 

www.extech.com 

FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA 

Certifié ISO 9001 

Содержание HD400












Отзывы: