EX570-ENG V2.3 3/09
12
Relative mode
The relative measurement feature allows you to make measurements relative to a stored
reference value. A reference voltage, current, etc. can be stored and measurements made
in comparison to that value. The displayed value is the difference between the reference
value and the measured value.
1. Perform the measurement as described in the operating instructions.
2. Press and Hold the
REL
button to store the reading in the display and the "
REL
"
indicator will appear on the display.
3. The display will now indicate the difference between the stored value and the measured
value.
4. Press and Hold the
REL
button to exit the relative mode.
PEAK HOLD
The Peak Hold function captures the peak AC voltage or current. The meter can capture
negative or positive peaks as fast as 1 millisecond in duration. Press the
PEAK
button.
“
PMAX
” will appear in the display. The meter will update the display each time a higher
positive peak occurs. Press the
PEAK
button again to exit the mode.
DISPLAY BACKLIGHT
Press the
HOLD/
key for >1 second to turn the backlight on. The backlight will
automatically turn off after 10 seconds.
HOLD
The hold function freezes the reading in the display. Press the
HOLD
key momentarily to
activate or to exit the
HOLD
function.
LOW BATTERY INDICATION
When the low battery
+
icon appears in the display, the battery should be replaced.
AUTO POWER OFF
The auto off feature will turn the meter off after 15 minutes. To disable the auto power off
feature, hold down the
SELECT
button and turn the meter on. “
APO d
” will appear in the
display. Turn the meter off and then on again to re-enable the auto power off feature.
Byram
Labs
