Extech Instruments BT100, Руководство пользователя, Страница: 10 / 14

Version 2.1 7/09 10
Datalogging
Manual Data Logging (999 sets)
1. Log the reading one by one to the memory by pressing the M MEMORY button.
“ DATA M NO XXX ” will appear on the LCD for one sec. to indicate the memorized
location.
2. Press R READ button to review the logged readings. The display will show “ DATA R
NO XXX ”.
3. Press The and buttons to scroll through the logged readings.
4. Press R READ button again to stop viewing logged readings.
Continuous Data Logging
1. Press HOLD button for 2 seconds, the display will show INTV .
2. Using or button, select the desired interval time from 1 second to 255 seconds.
3. Press SET button to exit interval time setting.
4. Press M MEMORY button for 2 seconds to enter continuous logging mode, the display
will show M .
5. The M will flash every time a reading is stored.
6. Press M MEMORY button again to exit continuous logging mode.
7. Data stored using continuous datalogging can not be read directly on the tester’s
display, it must be downloaded to a PC using the supplied software.
Erasing Memory
When memory is full, “ Full ” symbol will appear on the display and logging will stop.
1. Press
button to turn off the tester.
2. Press and hold the MEMORY button, then press the
button. The display will indicate “
CLr ”
and all datalogged readings will be cleared from memory.