Model 451181 Version 3.0 07/06
8
Customizing a Memory Location Header
softkey in Memory screen 1, as described above, allows the user to
customize the header in the currently selected memory location.
1. Use the
▲
or
▼
arrow keys to step forward and backward in the header.
2. Use the
BACK
softkey to step backward
and erase characters while stepping.
3. Use the alphanumeric keypad to compose
a header. For example, press the ‘2’ key
and a window with the characters related
to the ‘2’ key will appear (namely,
2abcABC as shown in the diagram). Then
use the ‘2’ key again to scroll through the
character list. When the desired character
is highlighted the meter will automatically
place that character in the header.
4.
F2
CLR
is used to erase the header.
5.
F4
ENTER
is used to save the header.
Viewing Stored Readings
1. From the WECLOME screen, press
F2
MEM
2. Use the
▲
or
▼
arrow keys to scroll through the memory locations that contain the
stored data.
3. Press
F1
EXIT
to return to the WELCOME screen.
Printing Stored Data
Proceed to the second memory screen as previously described and use
F3
PRN
to print a
data record. Use the
▲
or
▼
arrow keys to select the desired data location (0- to 99) to
print.
Erasing Data
From the second memory display screen (discussed earlier), press
F2
CLR
softkey.
Answer
YES
when prompted to erase ALL recorded readings. Press
NO
to abort the
clearing process.
01:
V:
98.0FPM
T:
82.0loF
RH:
62.7%
WBT:
72.2oF
VOL:
0.0CFM
EXIT
NEXT
MEAS
HEADER EDITING
EDIT
2abcABC