background image

381235       Ver. 1.5    3/01

 

5

Maintenance 

Battery Replacement 

Note: Remove the probes or antennae before replacing the battery 
a.  When the display reading begins blinking, the battery voltage has fallen to critical 

levels and requires replacing. 

b.  Loosen the battery compartment screws (lower left side of the case back). 
c.  Replace the 4 ‘AA’ 1.5V batteries and replace the cover. 

Cleaning 

Caution:

 Use only a dry (or slightly damp) cloth to clean the plastic case. 

 

 

Calibration and Repair Services 

Extech offers complete repair and calibration services for all of the products we sell. For 

periodic calibration, NIST certification or repair of any Extech product, call customer 

service for details on services available. Extech recommends that calibration be performed 

on an annual basis to insure calibration integrity. 

 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and 

workmanship for one year from date of shipment (a six month limited warranty applies on sensors and 

cables). If it should become necessary to return the instrument for service during or beyond the warranty 

period, contact the Customer Service Department at (781) 890-7440 for authorization. A Return 

Authorization (RA) number must be issued before any product is returned to Extech. The sender is 

responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. 

This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, 

operation outside of specification, improper maintenance or repair, or unauthorized modification. Extech 

specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not 

be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to 

repair or replacement of the product. 

The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or 

implied. 

 

Copyright © 2001 Extech Instruments Corporation. 

All rights reserved including the right of reproduction in whole or in part in any form. 

 

 

(

(

 

Tech Support Hotlines 

781-890-7440 ext. 200 

[email protected]

 

www.extech.com 

Содержание 381235






Отзывы: