380940-EU-EN-V4.1-4/12
7
Auto Power OFF
To extend battery life, the meter will auto power off after 30 minutes of operation. To resume
operation either turn the meter OFF and then ON again or press the HOLD button.
Battery Replacement
1. When the low battery symbol appears on the LCD, the batteries must be replaced.
2. Turn the meter off and remove the rear battery compartment screw.
3. Lift off the battery compartment cover and replace the two 1.5V AA cells.
4. Replace the compartment cover and secure the screw.
You, as the end user, are legally bound (
Battery ordinance
) to return all used batteries
and accumulators;
disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Cleaning
Use only a dry cloth to clean the plastic case.
Specifications
General Specifications
Display
3-3/4 digit (4000 count) LCD with 40 segment bargraph
Functions
Watts, ACA, DCA, ACV, DCV, Frequency
Polarity
“-“ indicates negative polarity; positive assumed
Current sensor
Hall effect sensor type
Overload indication
Left blinking digit
DCA zero adjust
One touch zero key
Display rate
2 readings/second (20 readings/second for bargraph)
Auto Power Off
Meter turns off automatically after 30 minutes
Battery
Two 1.5V AA batteries
Operating temp.
-10
0
C to 50
0
C (4
0
F to 122
0
F)
Operating Humidity
< 85% RH
Power consumption
Approximately 10mA DC
Weight
190g (6.7 oz) including battery
Dimensions
183 x 63.6 x 35.6mm (7.2 x 2.5 x 1.4”) (HWD)
Jaw opening
23mm (0.9”) maximum conductor size
Standards
IEC 1010 Category III 300V, Category II 600V
