380801/803 Version 4.0 7/05
8
Windows
TM
Application Program
1. Start
Windows
TM
2.
Insert the supplied program disk in the appropriate drive
3. Press
the
START
button and select
Run
4.
Type SETUP and press the
Enter
key
5.
Follow the on-screen instructions
Main Software Window
When the program icon ‘Power Analyzer’ is selected and executed, the program
automatically searches for a connected power analyzer on an available serial port. If
no serial port is available a ‘No Communication’ message will display and the program
halts. Once the PC communication port is setup correctly, the main software window
will be displayed as shown below:
FILE
: Under FILE, the options detailed below are available.
Name:
Enter a file name where data will be stored.
Start Recording
: There are two sub-options under the START pull down menu:
•
Now: Starts automatic continuous recording when selected
•
Manually: A RECORD button will appear at the bottom right corner of the screen.
Press once to record one data point.
End Recording
: Stop recording data into the opened file.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
