38073A-en-GB_v1.0 9/16
3
To avoid electric shock, replace batteries when necessary.
Disconnect power to the circuit under test and discharge all capacitors before
testing resistance.
Do not use the meter in the presence of explosive gas or vapor.
To reduce risk of fire or electric shock, do not use the meter if it is wet.
Individual protective equipment should be used if HAZARDOUS LIVE parts in the
installation where measurements are to be carried out could be accessible.
CAUTIONS
CAUTIONS identify conditions and actions that could cause DAMAGE to the meter or
equipment under test.
Disconnect test leads before changing the position of the rotary switch.
Do not expose the meter to extremes in temperature or humidity.
Safety Symbols
This symbol, adjacent to another symbol, indicates the user must
refer to the manual or user guide for further information.
Risk of electrical shock
Equipment protected by double or reinforced insulation
Description
Meter Description
1.
Analog scale
2.
Mechanical zero
3.
Rotary switch
4.
V-mA-Ω positive input jack
5.
COM negative input jack
6.
Zero Ω adjustment dial
7.
Pointer needle
Shop for Extech products at:
1.888.610.7664
ShopExtech
.com
